Pole Top Make Off
The Pole top makes off is used as a clamp which is aim to firm the pole on the earth.
As a leading manufacturer, supplier, and exporter, Rax Industry can support all sizes of pole tops, We can also customize them according to your designs. Rax Industry pole top makes off replaced the wedge clamp and UT clamp and make the installation more simple.
| PT NO | Stay Dia. | Stranding | Rods | Sets | Approx | Approx |
| mm | mm | per set | per pack | Pack Mass | Length | |
| (kg) | (mm) | |||||
| 284-6 | 7.21 | 3/3.35 | 4 | 15 | 8 | 2290 |
| 312-6 | 7.92 | 7/2.65 | 4 | 15 | 14 | 2290 |
| 345-6 | 8.76 | 3/4.00 | 4 | 15 | 17 | 2290 |
| 384-6 | 9.75 | 7/3.25 | 4 | 15 | 19 | 2290 |
| 386 | 9.8 | 4/4.00 | 4 | 15 | 19 | 2290 |
| 396-6 | 10.06 | 7/3.35 | 4 | 15 | 14 | 2290 |
| 432-6 | 10.97 | 5/4.00 | 4 | 10 | 17 | 2290 |
| 472-6 | 12.19 | 7/4.00 | 4 | 10 | 20 | 2290 |
| 520-6 | 13.25 | 19/2.65 | 4 | 10 | 24 | 2290 |
| 640-6 | 16.25 | 19/3.25 | 7 | 5 | 18 | 2290 |
What is the function of a pole top make off?
The pole top make off is used to wrap around the pole top to facilitate termination of stay strand that firms the pole on the earth.
How to install the pole top make off?
There are many different connect ways for the round head of pole top make off jointing on the pole.
Usually, the round head of pole top make off is connected to the pole directly.
Another way is to assemble on the tension clamp or on the pole band.
The other end of the pole top make off is wrapped by the short guy grip, and assembled on the insulator pin together.
What is the facture of the pole top makes off in the factory?
1. High strength: The galvanized steel wire is a high strength, and there is an extra length to combine with the guy grip, the grip strength is equal to 95% stay wire breaking load or more.
2. Resistant rusty: The pole top make off are the same raw material as the short guy grip, it’s not easy to get corrosion on the connecting place.
3. Prevention of thievery: It connects firmly, and is not easy to be stolen.
How to produce this pole top make off?
Rax Industry pole top make off construction is very simple.
Rax Industry pole top makes off raw material is galvanized steel wire.
A few pieces galvanized steel wire Strandtogetherby the machine.
After the few wires strand into one group, the two ends of the strand will meet together to grand into one group again.
As a pole top make off manufacturer, Rax Industry controls the quality very well.
The raw material steel wire is all A grade.
During the grand process, the bent wire will be selected for the disqualification area.
The finished pole top makes off will be sent to the breaking load test.
Only when passing the test, Rax Industry pole top makes off can be loaded into the container.
Rax Industry will try their effort to make every detail perfect. Please send your inquiry to us now!