Yoke Plate, Galvanized Yoke Plate for Transmission Line

Yoke Plate

The yoke plate is also called the clevis plate. The yoke plate is string hardware which used to couple the electrical clevis, socket tongue, or insulators. We often see the yoke plate on overhead power lines, and power transmission lines. The yoke plate is installed to attach the insulators to the cross arm on one hand and to the conductor termination on the other hand. According to the shape, there are triangular yoke plates, rectangular yoke plates, and irregular yoke plates.

Rax Industry Yoke plate is made from carbon steel which is more than 16mm thick. The raw material has no welded or jointed points. Before mass production, the Rax Industry QC department will test the raw material carefully to prevent any accidents from happening.

The yoke plate form is made by oxy arc cutting. This way, the section will be smooth with no lumps. Rax Industry yoke plate holes are punched by a 140ton punching machine.

The surface of the Rax Industry yoke plate is hot dip galvanized. After hot dip galvanizing, every Rax Industry yoke plate is subjected to moisture salt heavy pollution with relative humidity up to 100%, dust, and intense solar radiation – the yoke plate will not get rusty.

Get Free Quote

Product Specifications Yoke plate
type	Dimension(mm)						Rated failure load (KN)	Weight (kg)
type	b	b1	h			L	Rated failure load (KN)	Weight (kg)
L-1040	16	16	70	20	18	400	100	4.43
L-1240	16	16	70	24	18	400	120	4.66
L-1640	18	18	100	26	20	400	160	5.80
L-2140	18	18	100	30	20	400	200	6.90
L-2052	16	26	100	30	26	520	200	8.00
L-2055	16	26	200	30	24	550	200	11.8
L-2540	16	30	110	33	24	400	250	9.0
L-3040	18	32	110	39	26	400	300	10.0
L-4255	24	38	250	45	30	550	420	24.4
L-5040	30	38	110	45	33	400	500	14.8
L-6045	32	42	200	51	39	450	600	25.5
L-6050	32	42	250	51	39	500	600	23.3